to je muj xorg.conf. Je v nem nejaka chyba?
# File generated by XFdrake (rev 142098)
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "A19-2A"
HorizSync 31-81
VertRefresh 56-75
# Monitor preferred modeline (60.0 Hz vsync, 64.0 kHz hsync, ratio 5/4)
ModeLine "1280x1024" 108 1280 1328 1440 1688 1024 1025 1028 1066
+hsync +vsync
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "ATI Technologies Inc"
BoardName "ATI Radeon 9500 - X850"
Driver "fglrx"
Option "DPMS"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
# === QBS Support ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
# === FSAA ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x960" "1152x864" "1024x768" "832x624" "800x600"
"640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x960" "1152x864" "1024x768" "832x624" "800x600"
"640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x960" "1152x864" "1024x768" "832x624" "800x600"
"640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x960" "1152x864" "1024x768" "832x624" "800x600"
"640x480" "480x360" "320x240"
EndSubsection
EndSection
# File generated by XFdrake (rev 142098)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
Section "Files"
# font server independent of the X server to render fonts.
# minimal fonts to allow X to run without xfs
FontPath "unix/:-1"
FontPath "/usr/share/fonts/misc:unscaled"
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
# allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Option "allowmouseopenfail"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz(qwerty)"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection
Section "Extensions"
Option "Composite"
EndSection
Honza
Post by Jan.Kaisertak jsem se dival na ovladace z www.ati.com a maji nazev
"ati-driver-installer-8.40.4-x86.x86_64.run" to jsem prehledl, ale je
sranda ze zadne x86 tam nejdou stahnout pro kartu Radeon 9550. Zkusim
to vyresit pomoci balicku "ati-8.34.8-1mdv2007.1.i586.rpm"
Honza
------------ Původní zpráva ------------
Předmět: Re: 3D akcelerace a Radeon 9550
Datum: 28.8.2007 08:16:23
----------------------------------------
Post by Jan.KaiserZdravim,
problem s webcamerou jsem uz vyresil, ale ted jsem narazil na
dalsi. Po
instalaci ATI ovladacu ze stranek www.ati.com a po prikazu aticonfig --initial
se nerozbehne 3D akcelerace - konci chybovou hlaskou "fglx
terminated". Jinak 3D
prostredi bezi a glxgears bezi kolem 2000 FPS. Pri pokusu o spusteni ATI Control
Centra konci chybova hlaska ze nejsou nainstalovany ovladace.
aky kernel a ake ovladace mas, to vyzera, ako na problem x86 vs
x86-64 jedno je tak ine inak..
Peto
---------------------------------------------------------------------------
Informace o konferenci(odhlaseni, provoz) na
http://www.mandrake.cz/metafaq
---------------------------------------------------------------------------
Informace o konferenci(odhlaseni, provoz) na
http://www.mandrake.cz/metafaq
---------------------------------------------------------------------------
Informace o konferenci(odhlaseni, provoz) na http://www.mandrake.cz/metafaq